Scheugenpflug > Safety and economic process for the barrel agitator

69bc9c3e85c501b0a6208cc7a55abbf9_M

The development of the familiar barrel agitator stations available on the market.

Germany, Neustadt – Barrel agitator station for 200 lire

The Scheugenpflug AG presents numerous innovative solutions for more efficient bonding, metering and dispensing processes

The Scheugenpflug Barrel Agitator Station for 200-litre barrels is a product innovation and further development of the familiar barrel agitator stations available on the market so far.

Up to now, mainly modified barrel agitator stations taken from the painting technology sector were used for the stirring and subsequent processing of casting resins in 200-litre barrels. However, these stations neither allowed for nor met the special demands of the different casting resins. Thus, conventional barrel agitator stations are unable to guarantee the sufficient sealing of the barrels for example. This is required to prevent irreparable damage to the expensive resins when using moisture-sensitive dispensing materials in a very hot and humid environment over a longer period of time. Another problem is that the casting resin cannot be placed in a vacuum and processed directly in the barrel. Furthermore, these conventional barrel agitator stations do not provide the features and process safety which users of preparation and feeding units for smaller barrels are used to and value greatly.

 

Simple operation for safety processing

The Scheugenpflug AG development team had this in mind when they decided to combine the functions of A310 preparation units for smaller barrels, which had proven successful over many years, with the preparation demands of 200-litre barrels. The result is an optimum product from a processing-technology viewpoint, one which stands out thanks to its high process safety and economic price. In addition to its temperature control and stirring abilities, new functions are now also available for preparing casting resins in 200-litre barrels, such as infinitely-variable evacuation which results in bubble-free preparation. This is achieved through the use of a specially constructed bell which is positioned completely over the 200-litre barrel, hermetically seals it, and thus replaces the rather inadequate barrel lid sealing systems in current conventional barrel agitator stations. Furthermore, the proven Scheugenpflug SCP200 controller is integrated with all the familiar functions, such as the vacuum controller, cyclical stirring, heating, filling level monitoring, limit value monitoring, operation data recording, external control, and much more. These features make the Scheugenpflug Barrel Agitator Station a comprehensively usable system, and possibly a preparation system which can be operated self-sufficiently, one which has everything to meet your processing-technology demands and the process safety you require.

Moisture and bubbles in large barrels are therefore now a thing of the past. When preparing casting resins in 200-litre barrels, the operator now has access to a large number of additional and useful functions which have long since belonged to the normal state of technology in preparation and feeding units for smaller barrels.

 

More info about:
http://www.scheugenpflug.de/

 

 

Previous Steinbichler Optotechnik > The outlook in 3D digitizing
Next Fair Powtech 2016 > Process technology 4.0 to increase efficiency

You might also like

Penn Engineering > PEM® self-clinching flush-head studs integrating unique X-Press threads

  Reduced time assembly and promoted high retention force New PEM® self-clinching flush-head studs integrating unique X-Press™ threads enable quick mating with push-on plastic nuts, wire tie products, or other

Schuler > Manufacturing car parts for prototypes

    Complete flexibility guaranteed KBW, based in Rohrbach, Germany, uses a 2,500 ton hydraulic tryout press from Schuler for the manufacture of car parts for prototypes. Previously, the largest system

> Euchner – Safety light grids and light curtains LCA

  Euchner is expanding its industrial safety engineering product range by non-contact safety guards. The Safety light grids and light curtains from series LCA are used for access control and

Lenze > g500 gearboxes with double torque up to 20,000 Nm

    Enhanced the g500 gearbox series Torques up to 20,000 Nm: Lenze has enhanced its g500 gearbox series substantially. With the new two- and three-stage helical, bevel and shaft-mounted

Schmersal > Presented at Automatica the PSC1 configurator

      Schmersal presents the new PSC1 configurator at the “Automatica” 2016 trade fair Safe control system – now really easily configured for individual needs using an iPad It

Micro Epsilon > Controller suitable for the monitoring of highly dynamic processes

      capaNCDT 6222 fastest capacitive controller The new capaNCDT 6222 controller enables even faster displacement, distance and position measurements. With up to 20kHz, it is considered the fastest

Penn Engineering > Self clinching nuts install with minimal footprint in ultra thin stainless steel sheets

    PEM® Type SMPP™ Self clinching nuts install with minimal footprint in ultra thin stainless steel sheets New PEM® Type SMPP™ self-clinching nuts from PennEngineering® install permanently in ultra-thin

Haimer > Safe Lock, the pull out protection for the shank tools

    Tool holding with high performance machining  Safe-Lock™ – The pull out protection for the shank tools. High performance machining (HPM) of difficult to machine materials places enormous demands on tool

Schuler > Hot forming of aluminum for lightweight vehicles

      Great weight saving for car bodies Following successful tests with high-strength alloys, Schuler is developing hot forming of aluminum sheet for serial production as an alternative lightweight