Sigmatek > Attractive human-machine interface: the ETT multi-touch series

 

Austria, Lamprechtshausen – Operating panels with PCT technology

 

 

The thinly constructed panels – with only a 48 mm installation depth – can be mounted directly on the machine.

The thinly constructed panels – with only a 48 mm installation depth – can be mounted directly on the machine.

The modern machine concept multi-touch operating panels
Young, powerful, attractive … the ETT multi-touch operating panels from SIGMATEK are looking for a challenging range of tasks in a modern machine concept.

With the ETT series, SIGMATEK launches operating panels that optimally combine multi-touch functionality in hard and software. The modern HMIs enable new, smart operating concepts that provide positive operating experience and conveys “zeitgeist”.

Equipped with an ARM-based EDGE2 Technology dual-core processor, the ETT panels provide high performance (2x 800 MHz) with low power usage. 512 MB of DDR RAM for internal program and data memory, 512-MB storage (microSD) for data logging, recipe and alarm management are also standard functions, as well as a 2D and 3D graphics accelerator. Even with graphically complex operating surfaces, the ETTs are in their element.

 

There are five ETT display sizes: 8.4 – 10.4 – 12.1 – 15 and 19-inch in classic 4:3 format
In the new SIGMATEK HMIs, projective capacitive touch technology (PCT) is used, by which the sensors are protected on the back of the robust, solid glass surface (IP65 protection). Multi-finger input, as well as the use of styluses and thin gloves are possible. For now, there are five ETT display sizes: 8.4 – 10.4 – 12.1 – 15 and 19-inch in classic 4:3 format.
The thinly constructed panels – with only a 48 mm installation depth – can be mounted directly on the machine, an operating console or integrated into the control cabinet and are therewith suited for the most varying areas of use. The interfaces are particularly selected, so that the HMIs fit in any machine and equipment configuration: 2x Ethernet, 1x CAN, 2x USB 2.0 and 1x USB OTG (On-the-Go). 8 digital in and outputs each are also on board, which can be used for command and signaling devices such as toggle switches, signal towers and operating mode switches. All connections are located on the bottom, which simplifies installation and maintenance. The ETTs operate without a fan. Reliability, robustness and electromagnetic compatibility (EMC) are essential properties of the SIGMATEK HMIs. The integrated 4 mm glass surface is completely dust-tight and easy to clean.

Logo backlighting with added value
Externally, the ETT multi-touch panels have a modern simple frameless design. A back-lightable logo gives the new panel series that special touch. The monochrome logo backlighting can be controlled via the application in any color (RGB). The ETT can therefore be perfectly integrated into the corporate design of the machine or equipment. The logo also lights when the touch screen goes into idle mode. An application-specific function can be created to make the backlit logo blink or display in a different color when an error occurs – a distinguishing feature with added value.

Even the software speaks multi-touch
In addition to the high performance of the panels, the efficiency of the visualization software is key factor. Only when hard and software interact perfectly, multi-touch is a fully integrated operating concept. The SIGMATEK panels are delivered with a Linux-based real-time operating system and the object-oriented development tool LASAL, which is well equipped for the creation of intuitive multi-touch applications.

 

More info about:
http://www.sigmatek-automation.com/

 

 

Previous Hexagon Manufacturing Intelligence > Set the standard for measurement software in every application
Next Baumer > Top protection: distance-measuring inductive sensors

You might also like

Nortec Fair > From medical implants to vehicle bodywork

    Everybody is talking about 3-D printing. NORTEC shows it all! Manufacturing engineering trade fair features 3-D printing special exhibition. Industrial 3-D printing is no longer a vision for the

Conec > SuperCon intelligent hybrid connector technology

      Saving costs and installation space in interface wiring by using intelligent hybrid connector technology For conventional wiring of motors, servo-drives or linear units/drives, time and costs for

> Fair Friend Group (FFG) – Smart production with world portfolio of machine tools and systems for EMO 2017

  At EMO 2017, the Fair Friend Group (FFG) is celebrating another milestone: for the first time, the renowned European, Asian and American machine tool brands of the Taiwanese giant

Applikon > Introducing micro-Matrix, the next generation in microbioreactors

micro-Matrix offers an integrated, easy-to-use, and cost-effective technology platform for the rapid handling and growth of large numbers of microbial strains, clone libraries, mutant banks, and cells. The system offers

> Mitsubishi Electric and Fraunhofer Institute – Industry 4.0 and smart devices: key enablers for business to move forwards

  Mitsubishi Electric using industry 4.0 and smart devices offers direct integration with machine control systems. The company provided a glimpse of the future with human orientated monitoring and training for

Larson Electronics > Released a rechargeable intrinsically safe led head lamp

    Larson Electronics releases a rechargeable intrinsically safe LED head lamp Larson Electronics, a company that specializes in industrial lighting equipment, has announced the release of a rechargeable LED

> Trevisan Macchine Utensili – Machine center DS 300/70C: extremely precise with fixed piece

The machine center DS 300/70C by Trevisan Macchine Utensili is a little genius with enormous potential, because it combines all the benefits of the work that can be performed in

igus > Installation of lubrication-free PRTs

  igus splits slewing ring bearing. Installation of lubrication-free PRTs now have the ability to be fitted to an already installed shaft. In most applications radial-axial plain bearings are fixed on

Chiron > Innovative approach to digitization and networking at AMB in Stuttgart

    CHIRON Group: Successful appearance at the AMB 2016 More visitors to the stand and promising talks with customers Good follow-up business predicted Digitization solutions in focus For five days,